Other materiales - Special armatures | STASTO Automatizacija d.o.o.

Other materiales - Special armatures

Control valve Type SG07, DN50; PN10/40; NC; Material: Zinc plated steel; Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 45 (100%); Characteristic Linear; Diaphragm actuator 125cm²; Mounted I/P-positioner SIPART PS2; Input signal 4-20mA

CVF-40-NC-005

2/2-way coaxial valve; PN40; 0...40bar; 48VDC; DN40; NC; Directly operated; Body: Stainless steel; Medium: Water; Incl. LED; Incl. mounting bracket; Incl. 2 mechanical limit switches OPEN/CLOSED; Special version

5-VD-MK10NC-549437

5-way valve block consisting of 4x2/2-way coaxial valve, G 3/8" 0-16 bar, 230VAC, DN10, NC, direct-acting body: stainless steel, medium: fuel additives incl. terminal box with cable 3m, back-pressure tight, special seals ATEX II 2 G Eex me II T4 and II 2 D IP 68 T130°C, 5-way valve strip (as per drawing K10 488000) in stainless steel with 1x blank cover in stainless steel, without sealing screw, valve seat in the block

5-VD-MK10NC-549438

5-way valve block consisting of 4x2/2-way coaxial valve, G 3/8" 0-16 bar, 230VAC, DN10, NC, direct-acting body: stainless steel, medium: fuel additives incl. terminal box with cable 3m, back-pressure tight, special seals ATEX II 2 G Eex me II T4 and II 2 D IP 68 T130°C, 5-way valve strip (as per drawing K10 491000) in stainless steel with 1x blank cover in stainless steel, without sealing screw, valve seat in the block

SG05-40-WWC80-01

Control valve Type SG05; DN40; PN10/40; NC; Material: 1.4408, Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 26 (100%), Characteristic linear, Actuator diameter 80mm; Digital positioner; 4-wire; 4-20mA

SG25-25-WWCW

Manually operated sliding gate valve, High temperature design Type SG25, DN25; PN10/25/40; Housing material: Stainless steel 1.4571/1.4581; Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 11 (100%); Characteristic Linear; Actuation Handwheel; Medium temperature -60…450°C

SG07-50-UWC1253-01

SG08-80-UWFECB-01

control valve with electrical actuator type SG08; DN80; PN10/40; housing: zinc plated steel, fixed disc AISI 316Ti; sliding disc SFC; kvs-value 92 (100%); characteristic linear; voltage 90-260VAC; control actuator CA260C; setpoint value input 4-20mA; position feedback 4-20 mA; 2 limit switch; operating time 16,5 seconds

SG05-32-UWC80-01

Control valve Type SG05; DN32; PN10/40; NC; Material: Zinc plated steel; Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 8 (100%), Characteristic equal percentage; Actuator diameter 80mm; Digital positioner; 2-wire; 4-20mA; ATEX II 2G Ex ia IIC T4 Gb; Silicone-free; Incl. Earthing connection

CVTEH-40-NC-003

2/2-way coaxial valve; Externally controlled; G11/2"; 0...200bar; DN40; NC; Body: Zinc plated steel; Medium: Heating oil 80°C; Special seals; Incl. 2 inductive limit switches OPEN/CLOSED (B.); ATEX CE Ex II 2 GD c T4; Incl. inspection certificate 3.1; Hydraulically controlled 15...30bar; Special version

BS08-50-V-L

Ball sector valve; Wafer type; DN50; PN40; Body 1.4408/1.4404; Ball sector 1.4408 Hard chrome plated/Lapped surface; Seat ring Stellite; Seals made of FKM; KVS 94 (100%); Medium temperature -15...+200°C; Actuation Hand lever

CVF-40-NC-031

2/2-way coaxial valve; Directly operated; Flange DN40; PN40; 0...40bar; 24VDC; NC; Body: Stainless steel; Medium: R134A/1234YF; Special seals; Terminal box; Incl. 2 inductive NAMUR limit switches OPEN/CLOSED (B.); Incl. inspection certificate 3.1; Special valve testing; ATEX CE Ex II 3G Ex ec IIC T3 Ta -20...+80°C Gc; CE Ex II 3D Ex tc IIIC T195°C Ta -20...+80°C Dc; Ex II 3G Ex h IIC T3 Gc; Ex II 3D Ex h IIIC T195°C Dc; Special version

SG07-15-WWF1253-03

Control valve Type SG07, DN15; PN10/40; NC; Material: 1.4408; Fixed disc 1.4571 Coated; Sliding disc SFC; Kvs-value 4 (100%); Characteristic Linear; Diaphragm actuator 125cm²; Digital positioner; 8049 2-wire; 4-20mA

BS09-50-P-B

Ball sector valve; Wafer type; DN50; PN40; Body 1.4408/1.4404; Ball sector 1.4408 Hard chrome plated/Lapped surface; Seat ring PEEK; Seals PTFE/O-ring Silicone PFA-Coated; KVS 109 (100%); Medium temperature -60...+220°C; Bare shaft; Mounting flange F05; Square 14mm

SG04-100-UWF80

sliding gate-shut off valve pneumatically operated type SG04, DN50; PN10/40; NC; housing: zinc plated steel, fixed disc 1.4571 coated; sliding disc SFC; kvs-value 154 (100%); characteristic linear; piston actuator 80mm

SG05-50-UWC80-01

Control valve Type SG05; DN50; PN10/40; NC; Material: Zinc plated steel; Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 45 (100%), Characteristic linear, Actuator diameter 80mm; Digital positioner; 4-wire; 4-20mA; ATEX zone 1; Silicone-free; Ink. Earthing connection

SG07-50-UWC1253-02

Control valve Type SG07, DN50; PN10/40; NC; Material: Zinc plated steel; Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 28 (63%); Characteristic Linear; Diaphragm actuator 125cm²; Digital positioner; 4-wire; 4-20mA

VSVF65NCDR-535664

3/2-way coaxial valve, DN 65, PN 16 0-16 bar, NC, pilot-operated body: zinc-plated steel, medium: lubricating oil ISO VG 220 70°C incl. special seal

SG06-50-UWN80-01

Control valve Type SG06; DN50; PN10/40; NC; Material: Zinc plated steel, Fixed disc STN2; Sliding disc STN2/STN3; Kvs-value 45 (100%), Characteristic linear, Actuator diameter 80mm; Digital positioner; 4-wire; 4-20mA; Fittings And Tube Made of plastic; 1 Inductive position indicator M12x1 Position CLOSED

MK40DRNC-546808

3/2-way coaxial valve, G 2" 0-16 bar, 24VDC, DN 40, NC, direct-acting body: stainless steel, medium: water ATEX II 2 G Eex me II T4 and II 2 D IP 65 T 130°C cable 3 metres

Search

Your Cart

Categories

Special armatures

Other materiales - Special armatures